How to Refill my Lexmark Lexmark #35 Cartridge
How to Refill my Lexmark Lexmark #35 Cartridge ?
Refilling lexmark # 35 :
Place the cartridge on paper towels.
Peal off the cartridge’s top label. There should be only one label on the cartridge, so you shouldn’t have problem locating it.
Fill the syringe with about 25 ml of ink, if it’s a black cartridge, or approximately 15 ml of ink, if it’s a color cartridge.
The amount of ink also depends on the cartridge capacity. If you’re refilling a single-color cartridge, inject the ink slowly into one of the holes underneath the label you peeled off. You can inject into any hole because they all go to the same sponge. After refilling the ink, you may leave the top label off. Its absence doesn’t affect the printing quality.
If your printer uses a tri-color cartridge, you will need to determine which hole leads to which ink tank--magenta, cyan or yellow. Usually, the top label on the cartridge, which you peeled off in Step 2, tells which hole leads to which color compartment. If you’re not sure, take a long needle or a toothpick and insert into each hole before you refill. When you take the needle out, it will be colored, so you will be able to determine which ink to fill into the hole.
Put the cartridge back into the printer.