pantum toner PB-211 got error

  • The toner got error"out of toner" What can I do now?

  • For your case, please try the following instruction to solve the problem:

    (1) Check the cartridge and the laser machine are compatible. If they are not compatible, you will get this error.
    (2) Verify the main motor is rotating.
    (3) Turn off the printer and the remove cover. Look through the cutout in the laser machine chassis to check the gears are meshing.

    When you install the black cartridge in the laser machine, the cartridge lever assembly will move into a lower position. This will lock the cartridge into the developing position (vertical position.) this locking position will activate the cartridge switch. When the switch is activated, it will notify the machine that a black toner cartridge has been installed. If your laser machine does not recognize the cartridge, it is likely that the switch is causing this problem. Try reinstalling the cartridge.

    Open the top door and observe the gears separating. Then close the door and watch them mesh together. Turn on the laser machine and watch the gears.
    If still get same problem, please try another toner to see if the problem came from the printer.

    Thank you for your support.

Log in to reply





Looks like your connection to Shopper+ Forum Canada was lost, please wait while we try to reconnect.