Brother tn210 starts to leak after 50 pages.



  • Hi there, recently my TN210 starts to leak on the paper only after max 50 pages, what can i do?



  • Dear customer,

    Thank you for choosing 123inkcartridges / Shopper + Family.

    Follow the instructions to reset Brother TN210 Toner Levels for HL series(tested on Brother HL-3045CN):

    1. Open the front cover that gives you access to the toners.

    2. Press and hold “Secure Print” and “Cancel” at the same time. You will see “K-TNR-STD” display on the screen.

    3. Using the “+” and “-” buttons select the toner you want to reset.
      K-TNR-STD Black
      C-TNR-STD Cyan
      Y-TNR-STD Yellow
      M-TNR-STD Magenta

    4. Press the “Ok” button.

    5. It will display “Ok?” and hit the “Ok” button again to reset the toner.

    6. Close the cover and the printer is ready to print.

    Example 2:

    Follow the instructions to reset Brother TN210 Toner Levels for MFC series(tested on Brother MFC-9125CN)

    1. Open the front cover where you can access toner cartridges.

    2. Press the Clear/Back buttons on the printer panel at the same time to see the toner menus on the screen.
      K.TNR-STD will appear on the printer screen

    3. Press the “+” or “-” in order to navigate the toners you need to reset.
      K-TNR-STD Black
      C-TNR-STD Cyan
      Y-TNR-STD Yellow
      M-TNR-STD Magenta

    4. Scroll through and repeat for each colour toner cartridges as necessary.
      When you choose the proper toner, press OK. Now you have two options to choose: 1.Reset or 2.Exit
      Press #1 to reset the counter. After each selection, “Accepted” will shows up.

    5. Close the cover and the printer is ready to print.

    Thank you!


Log in to reply
 

3
Online

2.5k
Users

3.5k
Topics

7.0k
Posts

Looks like your connection to Shopper+ Forum Canada was lost, please wait while we try to reconnect.